- Water Treatment[10]
- Water Filters[7]
- Workshops & Plants[5]
- Contact Person : Mr. Lee Kings
- Company Name : Guangzhou Water Code Membrane Technology Co., Ltd.
- Tel : 86-20-86442051,15118728113
- Fax : 86-20-39958260
- Address : Guangdong,GuangZhou,Building(next to MingJing Committee), MingJian Part, ShiHua Road, MingJing,HuaLong Town,PanYu District,GuangZhou.
- Country/Region : China
Permanently Hydrophilic PP MBR
MBR-Membrane BioReactor for waste water treatment plant (Sewgae Treatment Plant,Effluent Treatment Plant,Wastewater Treatment Plant)
Membrane technology has advanced significantly in the past decade, for both water purification and wastewater treatment. Today, membrane-based systems have become the preferred technology for many potable water purification & treatment applications: Cryptosporidium and Giardia control, color or suspended solids removal, etc.
Most recently, the combination of membranes with the activated sludge process has redefined basic sewage treatment, optimizing the biological treatment operation and yielding a treated effluent that is ideal for reuse.
key advances in membrane technology are at the leading edge of this trend:
a) Quality & bacteria-free effluent with high efficiency in removing organic & inorganic matters
b) Minimum plant size with elimination of conventional element
c) Stable & efficient biological process is maintained
WaterCode Membrane for MBR Application
The recent development of less expensive and more efficient hollow fiber membrane from WaterCode has generated new concept in membrane filtration application.
1) It is capable of separating both insoluble solids in the process fluid (bacteria, viruses, colloids and suspended solids) as well as higher molecular weight soluble organics, where nominal pore sizes ranging from 0.1~0.01 micron.
2) The Hollow Fiber Membranes are used to construct the Immersed Type MBR Membrane.The membrane capillaries are long, flexible and extremely durable. These membranes are “clamped” into top and bottom distribution tubes, and will be assembled into as a membrane module.
3) Membranes are immersed directly into the mixed liquor of the biological reactor, reducing the entire treatment process to a single-step operation and replacing the clarifier of a conventional plant with an ultimate barrier for biomass control.
4) Almost all systems are now based on the significantly more energy efficient, immersed, hollow-fiber membrane, which exhibits a very large membrane surface area.
5) The large surface area in contact with the process fluid allows operation at very low trans-membrane pressures.This, in turn, reduces fouling of the membrane surface and allows for extended periods of operation with very low maintenance.
MBR membrane water filter for Industrial/Commercial/Residential wastewater treatment application
Characteristic of WaterCode Hollow Fiber Ultra-Filtration Membrane used in MBR application
SPECIFICATION | MBR-4 | MBR-8 | MBR-4H | MBR-8H | MBR-5F | MBR-10F |
Recommended Flow (m3/day) | 0.3-0.5 | 1.0-1.2 | 0.4-0.6 | 1.0-1.5 | 0.8-1.5 | 2.5-4.0 |
Standard filter area(m2) | 4 | 8 | 4 | 8 | 5 | 10 |
Material of Membrane | Normal PP (Polypropylene) | Permanently Hydrophilic PP (Polypropylene) | PVDF (Polyvinylidene fluoride) | |||
Storage Form of Membrane | Wet Form | Dry Form | WetFrom | |||
Output Turbidity | <0.2NTU | |||||
SS removal | 99.99% | |||||
Bacteria&Virus Removal | 99.99% | |||||
Type of Module | Outside-In MBR | |||||
Diameter of Hollowfiber | ID=320-350μm Thickness=40-50μm | I/O: 0.8/1.0mm or 1.0/1.6mm | ||||
Pore Size | 0.1-0.2μm | |||||
Air Permeability | >8.0×10-2(cm3/cm2·s·cmHg) | |||||
Longitudinal strength | 120Mpa | |||||
Porosity | 40-50% | |||||
Max.Operatiing Vacuum Pressure | 0.04-0.08 Mpa | |||||
Max TMP(MPa) | 0.2 Mpa | |||||
Recommended Vacuum Pressure | -0.15 Mpa | |||||
Temperature | 5-45°C | |||||
PH | 2-13 | |||||
Discontinuous chlorine resistance | 1000PPm |
Permanently Hydrophilic PP MBR